Screw conveyor trough shaped

Screw conveyor – trough shaped

Fjordvejs Maskinfabrik’s trough shaped screw conveyor is designed to run day and night, 365 days a year! The capacity is standard from 9 – 250 m3/hour, but is also tailor made in required capacities and designs.

Fjordvejs trough shaped screw conveyor is made in extra heavy materials, that either can be painted, hot dip galvanized or made in stainless steel (AISI 304 or AISI 316). Bearings, bushings etc. are always in top quality.

The size of the flight in a screw conveyor is as standard from 125 – 500 mm, but it can be made up to 1000 mm in diameter.

  • The screw / flight is made in heavy welded steel segments
  • The pitch of the screw is depending on capacity and material that must be transported
  • Heavy central tube shaft for avoiding / minimizing use of intermediate bearings
  • The intermediate bearings can be greased from outside and is standard placed for each 3 m
  • The pitch on a screw conveyor can be increased, right- or left hand. Standard it is right hand screws.
  • The end bearings can be built on the trough itself or bracket mounted with special sealings
  • As standard the trough shaped screw conveyor is equipped with over flow flap with switch and we can add on speed guards.
  • The motor is as standard always placed in the outlet end, but can be placed in the inlet end if required

Dosing screws are primarily used for discharging / dosing difficult products as meat and bone meal, fish meal or similar difficult products. We can have two or more screws next to each other on a discharging system.

The edge on the lid is bent down to avoid water etc. going into the screw conveyor and as an extra option we can supply a 30o lid that makes the screw conveyor water-repellent when outside.

A trough shaped screw conveyor is primarily used for conveying, discharging and dosing many types of products.

A trough shaped screw conveyor from Fjordvejs Maskinfabrik is delivered with ATEX.

Data sheets

For further specifications please see following data sheets for trough shaped screw conveyor .

Data sheet 05 - 01  Data sheet 05 - 02  Data sheet 05 - 03  Data sheet 05 - 04  Data sheet 05 - 06   
Dynamic-it logo